RGB TRADES, LLC   

5600 Pioneer Creek Dr., Bay 1,  

Maple Plain, MN 55359

Call 763.551.2500  Fax 763.551.2549

 


Accumulation

Bag Sealers

Barcode Equip

Blister Sealers

Carton Sealers

Case Sealers

Checkweighers

Contact

Conveyors

Feeders

Home

HOT GLUE

Inkjet/Coders

Labelers

Metal Detect

Rotary Tables

Shrink-wrap

Wrappers

 

 Photos

Qty.

Description

Electrical

Metal Detectors: Heads, Conveyor type, Combo Checkweighers. 

 

2

Lock Inspection Systems Met30+f3 metal detector and Weighchek CK6000 checkweigher combo (L-R). Built in 2004, powers up and weights but metal detector has false positives reject. Conveyors are operational with individual AC drives. Has plastic Interlox belts. Possibly needs Analog or Frequency boards. Metal detector needs touch pad also. 240Vac. Checkweigher calibrates and weights. Screen and menu works. 

Lock Inspection Systems Met30+f3 metal detector and Weighchek CK6000 checkweigher combo (R-L).  Built in 2004, powers up but metal detector not working consistently.. Conveyors and Weightable are operational with individual AC drives. Has Interlox belts and square SS drive shafts. New bearings installed in weigh table. Weighs product and rejects under and overs. Metal detector detects metal for first 1/2 hour or so. There after has false rejects. 240vac and 80psi compressed air required. SS frame on casters.  

240vac 1ph
DSC09895 (2).JPG (898005 bytes)

Sold

1

Goring Kerr Tek DSP Conveyorized metal detector with 14x4" clear opening. Tested for detection of 1mm FE, 1.5mm NF, 3mm SS. In reconditioning at this time. We reserve this item for local rental. 

  • Fixed speed conveyor with white poly belt at 85ft/min. 

  • Alumimum frame. Adjustable leveling pads

  • Air Blow reject with adjustable mount.

  • Adjustable PP side guides.

  • Multi belt take-ups for centering belt.

  • Poly roller covers.

  • New drive chain.

115vac
 

Photos

1

Loma IQ model 6000 metal detector COMBO with Mettler Toledo Micro-Mate checkweigher. 

  • Stainless steel cabinets 

  • Anodized Aluminum conveyor frame. 
  • Wash down motor. Fixed speed. 
  • Nylatron chain transfer. 
  • Dual reject stations
  • Tested to detect and weigh.
230vac

1

 

Goring Kerr Tek DSP Conveyer pass through metal detector. SN 51106-2 and SN 51104-5.

  • Each has a 1mm FE & 1.5mm NON-FE test ball in cabinet

  • Units were attached to 1996 Ramsey Icore 8000s.

  • Aperture at 6" wide, 4" high and 3.0" from top of chain to top of opening. 

  • Tested and operates detecting test balls included.

  • Chain speed up to 80ft/minute. 

  • 4 chain (plastic) transfer. 

  • Set up for audio alarm at present time. 

  • DC variable speed drive. (may vary between machines)

We will test your product with sufficient notice and delivery of product and test samples. Contact Rick Brokke 763.551.2500.

115vac